MMHOSE-SUB-IH
Posted by Patrick Muschamp on 09 18 2014 04:48 PM

Model number: MMHOSE-SUB-IH

 

Installation Guide

 

SKUs affected: MMHOSE-SUB-IHBK; MMHOSE-SUB-IHBL; MMHOSE-SUB-IHRD

 

Common Installation Questions:

1. Installation is extremely difficult due to other engine components in the way.

2. Intake pipe will not fit easily. Fitment is tight.

 

Solutions:

1. Remove the Power Steering (P/S) pump; but do not disconnect the lines from the pump. There are three bolts up front in between the pulley that remove it. Also, the customer can remove the P/S pump mounting bracket to make even more room. The lines for the P/S system also bolt to the fuel rail brackets so the customer will have to remove those bolts as well to totally free up the lines in order to swing the P/S pump out of the way.

2. If you are having difficulty with installing the intake pipe onto the Mishimoto Silicone Induction Hose, we suggest using a small amount of lubricant or oil to help the intake pipe slip over the Mishimoto Silicone Induction Hose.  The intake pipe may crack, or tear if the customer forces the installation. If the customer has any questions, please feel free to contact us at support@mishimoto.com.

(0 vote(s))
This article was helpful
This article was not helpful

Help Desk Software by Kayako fusion