MMHOSE-SUB-ANC
Posted by Patrick Muschamp on 09 23 2014 10:12 AM

Model number: MMHOSE-SUB-ANC

 

SKUs affected: MMHOSE-SUB-ANCBK; MMHOSE-SUB-ANCBL; MMHOSE-SUB-ANCRD

 

Common Installation Questions:

1. Hose #6 (Coolant tank lower hose) is too small in diameter to fit (see attachment #1 and #2)

2. Customer is unsure of where the other hoses go

 

Solutions:

1. If you are experiencing this issue, please contact Customer Service directly at support@mishimoto.com with a copy of your receipt to obtain a replacement.

2. Below is a breakdown of where each hose should be located.

#1 & #2 - Coolant tank

#3 - Passenger side crank case (Requires removal of the intake top cover for installation)

#4 - Routed in front of the TMIC (closer to the passenger side)

#5 - Turbo inlet nipple

#6 - Coolant tank lower hose (Requires removal of the coolant tank for installation)

#7 - Driver side crank case (Requires removal of the TMIC for installation)

#8 - Blow off valve

#9 - Not used on USDM models.

 

Attachments:

1. Diameter of Mishimoto hose compared to OEM hose

2. Location of hose #6 (Coolant tank lower hose)



Attachments 
 
 1.jpg (38.81 KB)
 2.jpg (57.58 KB)
(1 vote(s))
This article was helpful
This article was not helpful

Help Desk Software by Kayako fusion