Posted by Patrick Muschamp on 10 28 2014 12:31 PM

Model number: MMOP-SPT


SKUs affected: MMOP-SPT


Common Installation Questions:

1. Can the customer remove the bolt between the larger ports going to and from the cooler to install a sensor? See attachment #1 for reference.

2. What temperature thermostat is included with the purchase and can this be changed?



1. This bolt is not designed to be removed.  A hole is needed to allow for proper CNC machining during production. Customers can use the 1/8" NPT Sensor port located on the side of the MMOP-SPT for a sensor.

2. The MMOP-SPT comes with a 185°F thermostat. We offer 160°F and 200°F thermostats if the customer would like to a run a different temperature. These are located on our Oil Cooler Kits and Accessories page.

 1.jpg (107.72 KB)
(0 vote(s))
This article was helpful
This article was not helpful

Help Desk Software by Kayako fusion