Tech Training - Subaru Radiator Caps
Posted by Patrick Muschamp on 06 30 2016 01:45 PM

Tech Training

Subaru Radiator Caps


The provided Mishimoto radiator cap should replace the stock cap located on the on the expansion tank. The stock cap attached to the radiator should be installed on the Mishimoto Performance Aluminum Radiator. The Mishimoto radiator cap is a two-way valve, while the stock radiator cap is a single valve. Due to the difference in construction, the Mishimoto cap cannot be used on the radiator. If the Mishimoto cap is fit onto the radiator, overheating may occur.

Please see the attached document for even more information including pictures.

 tt - subaru rad caps.docx (1.11 MB)
(2 vote(s))
This article was helpful
This article was not helpful

Help Desk Software by Kayako fusion